This is the blade designed primarily to be used in most cabinetmaker's shops. Combining a 10 degree hook angle and the alternate top bevel tooth grind, this blade provides a good crosscut in hard wood, soft wood, plywood and particle board.
Ideal working range from 1/2" to 2-3/4" thick. Thinner or thicker material may be cut but some loss of surface fininsh may occur.
- Use on all table saws, radial arm saws, or miter saws for crosscuts in soft wood, hard wood, plywood, or particle board
- Diameter: 10"
- Teeth: 60 ATB
- Arbor: 5/8"
- Kerf: .126
- Plate: .087