About: Kreg Pocket Hole Screw 1" #8 Coarse Pan-Head 100 count This is the screw to join 1/2 to 1/2 softwoods as the head easily seats below flush. Why Kreg Pocket Hole Screws are better: Extra metal in head eliminates head snapping off Deep square drive prevents driver from jumping out Large Maxi-Loc Head STOPS when it hits bottom of the hole Case hardened STEEL screwWasher head for added locking strength with Zinc coating Sharp edge of Self-Tapping tip drills a cleaner pilot hole Needle sharp point minimizes walking About the Maxi-Loc™ Head: Kreg's most common screw head type is the Maxi-Loc™ (SML) which is a washer head screw. The large bearing surface of the washer head is designed to seat securely in the bottom of the pocket, providing a tremendous amount of consistent clamping force on the joint line. Our second head style is referred to as a pan head (SPS). The pan head is a slightly smaller head size that allows it to easily get below flush when joining 1/2 material. This is particularly helpful when joining 1/2 to 1/2 plywood for drawer boxes. Coarse thread is good for softer woods. Pine, Cedar, Fir, Spruce, Basswood, Butternut, Poplar, Aspen, Plywood, Melamine, MDF, and Particle Board
About:
Why Kreg Pocket Hole Screws are better:
About the Maxi-Loc™ Head:
Kreg's most common screw head type is the Maxi-Loc™ (SML) which is a washer head screw. The large bearing surface of the washer head is designed to seat securely in the bottom of the pocket, providing a tremendous amount of consistent clamping force on the joint line. Our second head style is referred to as a pan head (SPS). The pan head is a slightly smaller head size that allows it to easily get below flush when joining 1/2 material. This is particularly helpful when joining 1/2 to 1/2 plywood for drawer boxes.
Coarse thread is good for softer woods.
Please wait...