This is the standard unit and not the bundle.
- Standard Unit
- 4 Sharpening Angles - 100%+ re-hones
- Less time sharpening - more time working
- Center It Clip - greater stroke length
- Sequencial angles - prolongs tool life
- Ergonomic Carriage - feels much better
- Centered Chisel - balanced sharpening
- Grip Mat - more stability and control
- Improved tool clamping - Easier Grip
M.POWER launched the Original FASTTRACK Mk1 15 years ago. In that time we've made and sold over 100'000 of them. Along the way we got great feedback from our customers and perfected the improvements now featured in the NEW FTS Mk2. Remaining at its heart, the ability to repeatedly create a super sharp, flat ground, square edge chisel and plane blade in a few minutes.
It's so simple, chisel in, and sharpen_ Plane blade in, and sharpen. There's No set up time.. No complicated attachments and No experience needed.. Place the mat and FASTTRACK down on a surface and start sharpening.
The FASTTRACK's just as 'at home' on-site as in your workshop. Whether you're a total beginner or the most discerning of professionals M.POWERs FASTTRACK Mk2 will deliver the perfect sharpening angle for an excellent edge again and again.
So what's the problem?
Traditionally chisels and plane blades are sharpened using a combination of either an oilstone, waterstone or diamond stone with a jig that holds the tool to be sharpened at the correct honing angle, many sharpening systems require a second jig to accurately set the angle of the first jig. This represents a sufficient deterrent to prevent workshop based woodworkers taking 20 minutes out of their project time to get any kind of edge let alone a decent one on their chisels; and what of the professional "On site" carpenter, do they really have the space or inclination to carry that kind of sharpening system with them? A system that the average home renovator would struggle to even set up in the first place?
The simple sharpening solution
The FASTTRACK Precision Sharpening System is a unique solution that holds the blade to be sharpened stationary and its angle constant while a diamond stone is guided across the cutting edge (at a 90° angle to the tool's normal cutting direction) at either 25°, 27.5°, 30° or 32.5°, depending on your application, making the bevel flat and the edge true, lasting, and requiring only minimal maintenance unless chipped or neglected. We've included Preparation and Finishing Diamond stones so you can start low to gain that super fine edge that makes a cutting tool a pleasure to use. The instructions provided will have you putting a razor edge on your chisels and plane irons within a few minutes of opening the package.
4 Sharpening Angles
The newly re-designed solid Aluminium diamond stone holding carriage doubles the number of sharpening angles than the original. This in turn doubles the life of your chisels and plane blades by allowing over 20 chisel re-sharpens between primary re-grinds. The angles are coded 1,2,3 and 4 making it simple to move from one sharpening angle to the next.
Center It Clip - Get the blade in the middle
The most important development is the "Center It Clip that re-locates a chisel in the middle of the tool bed. This reduces the pressure needed to hold the chisel during sharpening; but it also prevents the carriage coming off the end of the base. So it increases the length of the sharpening stroke, making the sharpening process quicker.
The new carriage is much more comfortable to use with curved ergonomic handle ends to more naturally fit the hand. Especially noticeable after an ALL chisel honing session when you could be using the FASTTRACK for a 30 minute set.
The NEW Mk2 also includes a non-slip mat that further increase stability when using the FASTTRACK.
- Included 2x Angled Diamond Cross Stones
- Quick Change Magnetic Lock
- Glides on Nylon Slips
- Grounded on Four Non-Slip Feet