Shown with optional accessories(Casters, In/Out Tables and Abrasive Rack - not included)
Raw Wood Sanding | White Wood Sanding:
Break sharp edges
Open grain for even finish absorption
Blend out minor defects
Sealer Sanding | Primer Sanding | Scuff Sanding:
Removes raised fibers and grain (denib/defuzz)
Degloss previously finished wood
Clean reclaimed wood
Distress (weathered/Southwest finish)
Pull out soft grain to create textured surface
Infinitely variable brush speed and conveyor feed rate allows for a wide variety of finishes
Quickly change brush heads or abrasive loadings
Fully adjustable tension rollers prevent stock slippage
Reinforced steel conveyor bed with a poly conveyor belt
Precision height adjustment
Bristle Contact Gauge included
Maximum width: 24"
Minimum length: 10"
Maximum thickness: 11", varies with brush style
Minimum Thickness: 1/32"
52" x 46" x 35"
9-11" typical diameter
Typical bristle length:
1-1/2 - 3"
Ranged variable, 400-1200 RPM brush
Steel with hinged back, two (2) 4" vacuum port, 1200 CFM min.
Drive motor (TEFC)::
208-230V, 60HZ; 1 PH, 30 amp service; 3 PH, 20 amp service
Direct Drive D.C motor, infinitely variable, 0-15 FPM 100 in.-lb. torque