Domino Joiner Domino DF 500 Q-Set

DOMINO Joiner DF 500 Q Set (including trim stop and cross stop) for fast, easy and strong mortise and tenon joining.

• Mortise width adjustment with the turn of a dial allows for easier alignment when joining panels
• Pivoting Fence allows you to create angled mortises from 0-90° with positive stops at 22.5°, 45°, 67.5°

Additional Details

• Patented routing principle: The spiral cutter rotates and oscillates to create perfect mortises
• Mortise Width Adjustment: Adjusting the width of the mortise allows for easier alignment when joining panels
• Positioning: With an adjustable fence angle, retractable stop flaps, adjustable cutter height with step gauge, and precise mortise depth stop, the DOMINO joiner enables precise mortise placement and spacing
• Pivoting fence: Fence creates angled mortises from 0-90° with positive stops at 22.5°, 45°, 67.5°
• Depth Control: Quick, precise adjustment for five different mortising depths, relative to the size of the tenon required for the application
• Stepped Height Stop: 7 different step positions for different material thicknesses for fast and easy fence height adjustment
• Dust extraction: Your mortises are clean and ready for glue when the DOMINO is used in combination with a dust extractor. Proper dust extraction greatly extends cutter life.
• Carbide Tip Spiral Bit: Durable, long-lasting bit withstands 5,000-14,000 joints depending on material
• Rapid Bit Change: Means you can change a bit in under 30 seconds to match desired tenon size

Specifications

Includes

• DOMINO DF 500 7/32" (5 mm) cutter
• Support Bracket
• Trim Stop
• Cross Stop
• Open ended spanner, WAF 8
• Systainer SYS3 M 187