Veritas MK.II Honing Guide Set

Veritas Mk.II Standard Honing Guide

The key to consistent and fast honing is repeatability – and this guide delivers it in spades. It will set bevel angles from 15° to 54° and a range of back bevels from 10° to 20°. It can easily accommodate chisels as narrow as 1/2" and blades as wide as 2 7/8" and up to 15/32" thick.

The blade-registration jig slides onto the guide body, centering and squaring the blade with an integral fence. The blade stop has discrete positions for preset bevel angles. It features a three-position eccentric roller, allowing you to hone micro-bevels quickly and accurately with only a turn of a knob.

Manufactured from die-cast zinc alloy, with precision-machined brass and steel parts. For the user, this means quick, accurate sharpening and perfectly repeatable results, reducing unnecessary stone and blade wear. Patented.

Features:

• Delivers repeatable, consistent, fast honing
• Integral blade registration system squares the blade and sets the bevel angle in one step. Slides onto the guide body, centering and squaring the blade using an integral fence.
• Includes three gross bevel-angle range configurations: a high-angle range (25° to 54° in seven increments), a standard-angle range (15° to 40° in six increments), and a third range for back bevels. Blade stop has discrete positions for preset angles.
• Clamping mechanism registers on the face of the blade, accepting flat and tapered blades as well as those with irregular geometry
• Has three eccentric roller positions, allowing a micro-bevel to be honed quickly and accurately after a simple twist of a knob
• 2" wide brass roller is stable for the narrowest of blades
• Accommodates chisels as narrow as 1/2" and blades as wide as 2-7/8" up to 15/32" thick
• Works with short blades, such as spokeshave blades, without special jigs
• Die-cast zinc alloy with precision-machined brass and steel components
• Patented