Powermatic Model TS29 7.5HP 3PH Shaper

The new TS29 Tilt/Slide Shaper is ready to tackle any job. A new fence design includes dual digital readouts, micrometer adjustments and independently adjustable fence halves for fast, accurate set-ups. The full guard includes two stock hold-downs and a see-through cover that flips up for quick tool changes. Dual dust collection ports, in the guard and under the table insure a clear work area and improved finish. An extra large quill assembly with a full seven inch stroke has three oversize bearings and the ability to tilt, adding versatility and insuring long, trouble-free performance. Powered by a big 7-1/2HP motor that drives the spindle forward and reverse with five speeds. The massive sliding table is fully supported by six tapered precision bearings through a full four-foot stroke. In addition, on board the table is a large miter head complete with stock hold-down clamp and a 56" miter fence with flip stop. The large table can easily accommodate a stock feeder for longer production runs.

Details:

• Sliding table with 4-foot stroke works with miter head, hold-down and fence to accomodate everything from multiple end cuts to tenons
• Fully adjustable fence with dual digital readout for fast, accurate set-up and repeatability
• Large table with built-in slider with room for stock feeder
• 7" vertical spindle travel allows stacked tooling
• Spindle tilts negative 5° to positive 45° for increased versatility
• Large diameter multiple table inserts accomodate virtually any size cutter
• Five spindle speeds in forward and reverse with lighted indicator

Specifications:

• Part Number: 1791284
• Warranty: 1 Year
• Spindle Speed: 3000, 4000, 6000, 8000 and 10,000 RPM
• Reversable: Yes
• Spindle Diameter: 3/4, 1 and 1 1/4"
• Spindle Size Under Nut: 3/4 (3 1/2), 1 (6 1/4) and 1 1/4 (6 1/4)"
• Spindle Travel: 7
• Tilting Spindle: 45° forward, 5° back
• Table Size: 51-1/2 x 33-1/2"
• Fence Size (L x H): 46 x 5"
• Fence Travel (Major and Minor): 5-3/8 and 3-5/8"
• Slide Table Size (L x W): 11-1/4 x 51-1/4"
• Table Travel: 49-1/4"
• Table Inserts: one tilting, two straight
• Maximum Diameter Cutter Below Table: 9"
• Maximum Diameter Cutter Above Table: 12"
• Router Bit Collet Diameter: 1/4 and 1/2"
• Dust Port Outside Diameter: 5" (dual ports)
• Dust Collection Minimum CFM Required: 800 cu.ft/min
• Electrical Controls - Magnetic Starter: Yes
• Motor Power: 7-1/2 HP
• Motor Voltage: 230 / 460 V
• Prewired Voltage: 230 V
• Motor Phase: 3 Ph
• Model Number: TS29
• Brand: Powermatic
• Overall Dimensions: 51 x 44 x 53
• Height: 53 inch
• Width: 44 inch
• Length: 51 inch
• Net Weight: 1100 pound