Water Based Wood Filler Red Oak Qt
    Water Based Wood Filler Red Oak Qt Image
    Water Based Wood Filler Red Oak Qt Image

Timbermate® Waterbased Wood Filler, Red Oak, Quart

Item #: TG25027

Product Description

Timbermate Woodfiller is an Interior grade 4 in 1 woodputty, grainfiller, edgefiller and crackfiller. When thinned slightly with water can also be used as a sanding sealer. Timbermate does not shrink, sink, crack or fall out and has an indefinite shelf life. It is non-flammable, non-toxic and can be used to the last gram. The secret ingredient of Timbermate is tap water therefore containing no Acrylic, Latex or Solvents. Timbermate comes in 13 premixed colours plus Natural Tint Base. Timbermate takes all types of known stains, varnishes and coatings. The Timbermate formula is over 85 years old and is the only genuine water-based formula in the world proving that the formulation has stood the test of time.


Apply TIMBERMATE with a spatula or knife using hand pressure to force into the Edge or End of the grain. For spray gun use stir 10% - 15% water into TIMBERMATE fit a 2mm mozzle and set pressure to 60psi. Boards can be stacked for easy spraying. Allow to dry and sand with a fine grit paper and apply topcoat.

Woodfiller/Wood Putty:
Fills cracks, knots, pin and screw holes, splits, blemishes, etc. Fill deep holes in layers allowing time for each layer to dry. Will not blind natural wood grain. Drying time is about 30 minutes. TIMBERMATE dries hard and smooth without shrinking or sinking and can be belt or drum sanded as it is not affected by heat, the hotter it gets the harder and faster it sets and that means less "Down Time."

You can speed dry TIMBERMATE by adjusting the surrounding air temperature. This can be done by using either hot air, heat lamps, or kiln ovens.TIMBERMATE can be mixed with any stains before or after filler is dry. To match medium and darker shades mix with Natural, Pine or other light shades.

TIMBERMATE is recommended for interior use. TIMBERMATE is non-flammable, non-toxic and non-yellowing. TIMBERMATE is completely compatible with acid catalysed lacquers, as well as all known lacquers, top coatings and P.U. Fills cracks in masonry, plaster, flooring, drywall,brick, concrete, fibreglass, plastic or metal. Can be mixed with woodglues. Being water-based TIMBERMATE is non-flammable and contains no acetone, toxic or harmful ingredients. Also, TIMBERMATE will take varnish, urethane, wax, polish, lacquer, linseed, and other oils. TIMBERMATE can handle screwing, planing, cutting, drilling and sawing.

Use white TIMBERMATE only for white top coats.

Mix 10% to 15% water into TIMBERMATE to make a perfect Grainfiller, Sanding Sealer and Prime Coat all in one application. First sand surface and with fine grit sandpaper, then apply Grainfiller to surface with a spray gun, paint roller, hessian or a cloth rolled into a ball, rub across the grain in a circular motion finishing with the grain. Sand, once filler is dry, to perfection with either sandpaper or power sander, using a fine grit paper. Grain filer can be used in a Roller or Curtain Coater or Spray Gun using a 2mm nozzle and 60psi pressure. Can be further thinned down with water if required.

Due to the finishing system used to manufacture MDF it is essential to seal the job with a water based non-acrylic product before applying top coats. Therefore TIMBERMATE meets your needs.

Scrape all dust and waste between boards and surface as well as from knot holes and nail heads, vacuum well and carry out first sanding to prepare for filling and coating. Ensure that floor is stabilised, dry and free of movement.

Fill cracks, knot and nail holes and all blemished with a putty knife. Fill deeper holes in layers of about 6mm allowing each fill to dry. Apply TIMBERMATE to entire floor, as a sealant, using a squeegee, trowel or paint roller. Allow to dry and sand off with a fine paper - 120 to 150 grit is recommended for best results. Floor can now be stained or varnished.

GTIN:  9315284013204

Related Style Items

Item # Description Price Qty
TG25030 Water Based Wood Filler White Qt $17.95
TG25024 Water Based Wood Filler Mahogany Qt $17.95
TG25027 Water Based Wood Filler Red Oak Qt $17.95
TG25022 Water Based Wood Filler Brazil Cherry Qt $17.95
TG25021 Water Based Wood Filler Ht Pine/Teak Qt $17.95
TG25029 Water Based Wood Filler Walnut Qt $17.95
TG25023 Water Based Wood Filler Cherry Qt $17.95
TG25031 Water Based Wood Filler White Oak Qt $17.95
TG25028 Water Based Wood Filler Ebony Qt $17.95
TG25026 Water Based Wood Filler Nat Tint Base Qt $17.95
TG25032 Water Based Wood Filler Alder Qt $17.95
TG25033 Water Based Wood Filler Tasmanian Oak Qt $17.95
TG25025 Water Based Wood Filler Maple/Ash Qt $17.95
TG25020 Water Based Wood Filler Chestnut Qt $17.95

Items of Interest

Abatron WoodEpox® A&B Quart
Abatron Woodepox® A&B Quart
Item #: AB10000
Behlen Pore-O-Pac Base Natural 1qt
Behlen Pore-O-Pac Base Natural 1Qt
Item #: B7440416
Behlen Pore-O-Pac Reducer 1qt
Behlen Pore-O-Pac Reducer 1Qt
Item #: B7442006
Color Putty - Fruitwood 3.68oz
Color Putty - Fruitwood 3.68Oz
Item #: CP00110
E-Z Flow Stick Amber Med Transparent
E-Z Flow Stick Amber Med Transparent
Item #: M3150007
Mohawk Epoxy Stick Beige (20 Minute)
Mohawk Epoxy Stick Beige (20 Minute)
Item #: M7431500
Hard Fill Burn in Kit
Hard Fill Burn In Kit
Item #: M888S3518
Wood Handle Putty Knife 1-1/4"
Wood Handle Putty Knife 1-1/4"
Item #: SW28540
Timbermate Waxstix Alder / Baltic Pine
Timbermate Waxstix Alder / Baltic Pine
Item #: TG10001
Famowood- Wood Filler Oak 23 oz
Famowood- Wood Filler Oak 23 Oz
Item #: WF1128