Enduro-Var II WB Urethane Satin Qt
- SKU:
- GF89001
- Shipping:
- Calculated at Checkout
Description
Satin | Quart
Enduro-Var II is a reformulation of our original oil-modified, ambering, water-based topcoat. It replaces original Endurovar and is made with more than 70% RENEWABLE RESOURCES formulated from sustainable materials that decrease the carbon footprint and can be used with all of GF's water-based products. The new formula dries to a lighter amber than the previous formula, is highly water-resistant, and is both sprayable and brushable.
Specifications
- Dries Amber
- Base type: Water
- Ambering: Yes
- Interior only
- Tintable: Yes
- Oil-modified urethane
- Coats: 3 coats
- Application method: Brush, roll, spray
- Brushable: Yes
- Usable over existing finishes: No
- Sprayable: Yes
- Spray tip sizes: HVLP 1.1mm-1.3mm
- Dry time - touch: 30+ min.
- Dry time - recoat: 4+ hr
- Dry time - light use: 7-10 days
- Dry time - cure: 21 days
- Coverage: 125-150 sq.ft./quart, 500-600 sq.ft./gallon
- Viscosity: Thin
- Viscosity (cPs): 200-300
- Weight solids: 28%
- VOC: US VOC
- All sheens: <250 g/L
- Durability (highest, high, medium, low): Medium
- Hardness (Koenig #): 123
- Wear (Taber #): 95.60 mg loss
- Water (5 max): 3
- Chemical (105 max): 84
Videos
View AllClose
Warning: Prop. 65 California Residents
WARNING:
This product can expose you to chemicals including Ethylene Oxide, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to https://www.P65Warnings.ca.gov.