Matchfit Relief Straight Router Bit 1/4 x 1/4 Shank

Dovetail Router Bit (1/2"-14°)

Route your own tracks for jigs, fixtures, assembly, material handling, and more. The shank sizes are 1/2", 1/4", 12mm, and 8mm.

Included in the box:

• Router Bit (1/2"–14°)

DIY TRACKS. SAVE TIME AND MONEY

Route silky smooth dovetail tracks in a single pass.

• Specially designed to route tracks for MATCHFIT Dovetail Clamps and Dovetail Hardware. The Dovetail Bit's built-in roundovers cut clean dovetail grooves in a single pass.  Less time sanding, more time building. Available in 1/2", 1/4", 12mm, and 8mm shank sizes.

The MATCHFIT System was designed around a standard ½”, 14-degree dovetail profile because it is one of the most common dovetail router bits on the market. Despite its benefits, readily available dovetail bits presented a challenge - they cut to a sharp tapered point. Even a sharp dovetail bit would inevitably leave fibers at the top of the track, requiring additional sanding. We improved on the profile by adding a roundover, cutting impeccable tracks with no additional sanding needed.

One dovetail bit. One pass.

• Router collet safety line prevents bit from bottoming out in the router.
• Laser etched depth guide allows you to dial cutting depth in a snap.
• The built-in 1/16” roundover smooths out the top shoulders of the groove to prevent material from binding.
• The built-in 1/32” roundover strengthens the groove walls and helps clamps and hardware move more smoothly.

Route your own tracks virtually anywhere.

• ½” 14-degree dovetail profile.
• Laser etched depth guide to quickly set cutting depth. Depth tolerance: .365-.395”
• Built in roundovers for smoother cuts and less sanding.
• Extra wide shoulder reduces vibration and noise.
• 8-degree downshear carbide reduces splintering and contains dust.
• Available in 1/2", 1/4", 12mm, and 8mm shank sizes.