Woodstock

These larger bits are production tools designed for use on a drill press. Large saw-toothed Forstner Bits have a 1/2" shank and measure 6-1/4" long. Each bit comes in an individual wooden box...

2-5/16" ID 3" threaded on one end to fit inside 3" hose Flared on the other to fit 3" fittings without the need for clamps. This acts as a quick connect/disconnect.

This is an accessory for the Delta Dust Collector. Splices round out our full line of special fittings for dust collection systems . Used to connect sections of hose for longer runs or to utilize...

Hose clamps are used to connect flexible piping to dust hoods, blastgates, and fittings.

T-fittings provide the option of adding branches to a system to service each machine in a shop. T's are very helpful when space or design constraints prohibit the use of Y's. Specifications: ...

These fittings provide a step down from a larger main line to smaller branch lines. This stepdown increses air velocity near the machine where it's needed most. Specifications: Outer Diameters: ...

We engineered the inside diameter of the 2-1/2" side of each of these fittings to duplicate the 2-1/2" opening on your shop-vac. Insert the shop-vac brand hose to the vac and the other end to one of...

Hose clamps are used to connect flexible piping to dust hoods, blastgates, and fittings.

Y's are used to attach branch lines to service more than one machine. This design provides increased lateral air flow and efficiency over other types of fittings. Specifications: Outer Diameter: ...

Carbide-tipped boring bit creates clean entry holes with smooth interiors for European-style hinges. Use in drills or drill presses with 3/8" chunks.

Specifications: 45 degree direction change for building 4" dust collection systems Heavy wall thickness stands up to hose clamp pressure

Elbows are necessary whenever ductwork changes direction, such as from a dust collector to an overhead main line, or when connecting individual machines to branch lines. Specifications: Outer...