Mite-R-Gage

MITE-R-GAGE is a simple and economical tool that can be used to measure or layout angles. The tool allows the professional or do-it-yourselfer to take on difficult jobs involving angular cuts and fits- with professional results. The insert provided with each tool illustrates the primary uses and versatility of MITE-R-GAGE. The insert also gives clear simple instructions for using the tool. After the tool has been used a few times, most people do not need the instructions. It is an excellent companion tool for miter, table, or radial arm saws.

MITE-R-GAGE is made of LEXAN™* resin and will not break, crack, or warp under normal usage.

The dual (full plus half angle)** scale is embedded in the resin and paint filled. It will not wash or rub off. The black knob ( with one quick twist) allows the tool to be locked at any desired angle - useful for angle layout or as an adjustable try-square etc.

• Measure or layout all types of angles
• Check corners for squareness
• Check alignment of radial arm or table saws

MITE-R-GAGE is accurate to 1/4 of one degree.

• Scale diameter: 3-1/2"
• Arm(s) length: 10"
• Head height: 7/8"
• Arm width: 5/8"
• Overall length: 11-3/4"
• The approximate weight per tool is 4 ounces