System Three 15 Minute Quick Cure Epoxy 1/2 Pint Kit

• A two-component, solvent-free, epoxy/polymercaptan adhesive system
• Mix at a convenient 1:1 ratio
• Ideal for all small jobs requiring a strong bond and rapid cure
• An excellent gap filling adhesive
• Highly water resistant but not waterproof
• Cures at lower temperatures
• Available in cartridges that dispense with a conventional caulking gun

Physical properties:

• Mix ratio by volume: 100:100
• Mix ratio by weight: 100:97
• Total solids: 1
• Mixed viscosity: 10,500 cps
• Tensile lap-shear strength (aluminum/aluminum), psi: 1850
• Heat deflection temperature: 101°F (38°C)
• Maximum service temperature: 125°F (52°C)
• Coverage @ 20mil glue line: 80 ft2/gal (2 m2/L)
• Minimum application temperature: 40°F (5°C)
• Gel time @ 77°F (25°C): 10-12 minutes (30g mixture)
• Tack free @ 77°F (25°C): 15 minutes

Recommended uses:
Use Quick Cure for installing bungs, repairing missed staple holes prior to fiberglassing, "tack welding" wood, and for those other glue jobs, which require a fast cure. Do not use below the water line unless protected by an over coating like SilverTip Laminating Resin, STR General Purpose Epoxy, Clear Coat, etc.