Manpa 2" Hole Cutter (5/8"-11)
- SKU:
- KXM2182
- MPN:
- MP21-8-2
- Shipping:
- Calculated at Checkout
Description
These Hole Cutters are a highly unusual series of cutting tools. They virtually "drill" between approximately 2" to 3" diameter holes in wood using the great power of an angle grinder. Working with these different sized hole cutters adds a brand-new dimension to carving.
The 2" (50mm) Hole Cutter fits directly on a 4-1/2" (115mm) angle grinder (not included) with the included special adapter. Once they're hooked up, the carving end is 5-5/8" (143mm) away from the head of the grinder.
- It allows power gouging in any direction
- Has three replaceable, tungsten carbide round teeth MP21-R-R83S
- Cuts round holes approximately 1-3/4" (45mm) in diameter
- Drill holes for branches, makes unusual sculptures, large bowl cavities and much, much more!
- Inbuilt design of blade guide absorbs vibration and kickback reaction
- Use in a push/pull, up and down motion to carve deeper into wood
Includes
- 2" Hole Cutter
- T9 Torx Wrench
- Special Adapter (M10, M14, 5/8"-11)
Specifications
| Cutters | 3 |
| Grinder connecting bore size | 5/8" (16mm) |
| Hole cutter diameter | 1-3/4" (45mm) |
| Length | 4-1/8" (104mm) |
| 5/8" adaptor | 2" (51mm) |
| Cutter+5/8" adapter length | 5-5/8" (143mm) |
| Inside carving depth | 3-1/8" (80mm) |
| Wall width mm | 5/16" (8mm) |
2 Reviews
-
MANPA 2" BEAST!
Whilst there is little doubt that this works exceptionally well. The Aluminum body isn't quite cut out for the job. I primarily use hard woods (Ash, Maple) and recently one of the teeth just slowly squashed itself back into the housing, ruining the thread and creating a bump in the housing that transmitted up the tool and into my hands rather violently. I was initially able to remove the tooth and grind the housing down so the other 2 teeth could still bite, but eventually had to order another one. Which goes to show how good the tool is when it is in perfect working order.
-
MANPA 2" BEAST!
Whilst there is no doubt that the soft Aluminum of this creature is why I just ordered my second one ( I work with Ash which is notoriously hard) as one of the teeth bent itself into the body and I crudely just filed away the aluminum so I could still get the other 2 teeth to work. Cannot deny that this things absolutely RIPS. I am writing this review as I wait patiently for restocking and then I can get to work on about 8 projects that I simply cannot work on without this thing. If you sculpt with wood, this is a game changer. Paul Gordon
Warning: Prop. 65 California Residents
WARNING:
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to https://www.P65Warnings.ca.gov/wood.
Related Products
Manpa 3" Hole Cutter (5/8"-11)
Manpa 4" Hole Cutter (5/8"-11)
Manpa Crack Cutter (5/8"-11)
Manpa 2" Belt Cutter - Basic (5/8"-11)
