BLADECLEAN Blade & Bit Cleaning System

For saw blades up to 12" in diameter and router bits with 1/4", 1/2", 6mm, 8mm, or 12mm shank sizes.

What's Included:

• BLADECLEAN cleaning well
• Magnetic handle
• Wire brush
• Al&sub2;O&sub3; cleaning discs
• Rotary tool mandrel

The fastest way to clean your saw blades and router bits.

The BLADECLEAN Blade and Bit Cleaning System is the quickest, safest, and most enjoyable way to clean your saw blades and router bits. This all-in-one kit is compatible with:

• Saw blades (circular) - up to 12" in diameter
• Router bits - 1/4", 1/2", 6mm, 8mm, and 12mm shank sizes

Not compatible with shaper cutters.

Clean blades = clean cuts.

Dirty blades and bits put stress on your machine, generate more heat, and are often mistaken as dull. This is when blades are unnecessarily sent off for sharpening while, more often than not, all they need is a quick cleaning.

Less time cleaning, more time building.

Cleaning saw blades can be tedious and time consuming. The BLADECLEAN system shortens the entire job to just a few minutes. Quickly clean an entire side of your saw blade in a single motion, and without harsh chemicals.

The BLADECLEAN seals in liquid so it can be stored away for later use. You'll already be set up the next time you need to clean a blade or bit.

BLADECLEAN Features

• No bare hand contact with cutting edges or chemicals.
  The magnetic handle attaches to your saw blade, so your skin doesn't come into contact with harsh chemicals or sharp cutting edges.
• Industrial grade aluminium-oxide cleaning pads.
  No more wire brushing! The scouring pad is uniquely suited to reach every nook and cranny of your saw blade at once. Clean an entire side of the blade in a single motion.
• Clean a variety of router bit sizes at once.
  The router bit holder lets you soak and clean up to five bits in record time using the included scouring discs. Compatible with 1/4", 1/2", 6mm, 8mm, and 12mm shank sizes.

FAQ

What solvents can you use?
Use your preferred cleaner. Can be Simple Green, Fabuloso, Pinesol, or whatever you like. No need for harsh solvents and chemicals.

Will it work with a 12" blade?
Yes, the cleaning well is designed to work with blades from 7" up to 12"

How long will the BLADECLEAN Pad last?
It depends on how often you clean your blades, but our testing shows that the average woodworker will get several hundred cleanings before needing to replace the pad.

How often do you change the cleaning solution?
The dirt from cleaning tends to sink down through the pad, so it does not affect the cleaning process. When the solution is difficult to see through, it should be replaced.

What is the right speed for the aluminum oxide cleaning discs?
8,000 to 10,000 rpm provides the best balance between cleaning speed and disc life.

Can I clean router bits with bearings?
Yes, but you should remove the bearing before submerging the bit in cleaning solution. Many common household cleaners contain degreaser and can affect the bearing’s performance.