Proxxon

Proxxon HSS Bit Piloted Roundover 1/8" Router Bits have inverse ground flutes and are designed for optimal chip clearance. The Piloted Round-over bit is ideal for routing, inlaying, and mortising in...

Proxxon HSS Bit Plunge 1/4" Tungsten carbide wood router bit. It has 3.2mm (1/8") shanks, inverse ground flutes, and maximum speeds up to 30,000 rpm in different profiles for optimal results...

Proxxon HSS Bit Rabbeting 1/8" Router Bits have inverse ground flutes and are designed for optimal chip clearance. The Rabbeting bit is ideal for routing, inlaying, and mortising in wood and other...

Proxxon HSS Bit Straight 1/4" Wood profile cutter made of tungsten-molybdenum chrome vanadium steel for making grooves and edges in softwood, hardwood, and plastic. Router Bits have inverse ground...

Proxxon HSS Bit Straight 1/8" Tungsten carbide wood router bits, with 1/8" (3.2mm) shanks, inverse ground flutes, and maximum speeds up to 30,000 rpm. Straight Ø 1/8". 1 Piece. Router Bits...

Proxxon HSS Bit Straight 3/16" Tungsten carbide wood router bit. With 3.2mm (1/8") shanks, inverse ground flutes, and maximum speeds up to 30,000 rpm in different profiles for optimal results...

Proxxon HSS Router Bits For use with proxxon micro shaper MT300, number 37050 and micro router MOF, number 38568. The  Tungsten carbide bits are manufactured to the highest standards and operate...

Jig Saw Blades made from special steel fro PROXXON MICROMOT jig saws. Applications: For cutting hard and soft wood, plywood, fiberglass reinforced materials and various soft plastics. Especially...

Jig Saw Blades made from HSS for PROXXON MICROMOT jig saws. Applications: For cutting metals, especially aluminum and softer alloys, fiberglass, Plexiglas and insulating materials. Dimensions: 2-1/4"...

For curved cuts in wood, corrugated boards, plastics and nonferrous metals. Also ideal for gourd carving. This very lightweight and powerful 12 volts machine is ideal for curved cuts in wood up to...

Die-cast zinc with three machined sides. The slot fits the adjustable fence of the drill stand MB 140/S and Bench Drill TBM 115. Horizontal and vertical V-slots in jaw. Jaw width .2" and height .4"...

Spring steel, 0.1mm thick. For non-ferrous metals, plastic and wood. Specifications: Diameters of blades: .63", .75", .86" Shaft: .09"